Shop

Custom Titanium multi-hole reference standard. Contains 9 hole sizes; 2.0mm, 2.5mm 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm and 6.0mm, 6.5mm. 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5mm, 10.0mm, 10.5mm, 11.0mm, 11.5mm, 12.0mm, 12.5mm, 13.5mm, 14.0mm, 14.5mm, 15.0mm, 15.5mm, and 16.0mm hole diameters. EDM notch 0.5mm X 7.5mm deep in each hole (half of the material thickness). Material: 6AL-4V Titanium 15mm Thick. Includes Test Report and Certificate of ConformanceTraceable to NIST.

8 STEP WEDGE, STEP SIZES OF .015″, .025″,.040″, .060″, .080″, .100″, .150″, and .200″ +/- .001″. PAD SIZE: .75″x.75″, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

CUSTOM EC SKIN INSPECTION REFERENCE STANDARD. Contains various EDM Nothes in the Upper and Lower Skin. Upper Skin Thickness of .080″ and Lower Skin Thickness of .100″ Thick. Standard Physical Size = 13.5″ Long x 5.15″ Wide. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

SURFACE NOTCH REFERENCE STANDARD 4130 or 4340 CARBON STEEL. EDM NOTCH SIZE: FULL WIDTH OF PART x .51mm(.020″) DEEP +/- .05mm(.002″). BLOCK SIZE: 1.0″ WIDE x 3.0″ LONG. Includes Test Report and Certificate of Conformance.

9 STEP THICKNESS STANDARD. STEP SIZES: .020″, .030″, .040″, .050″, .060″, .070″, .080″, .090″, .100″ +/-.001″. PAD SIZE 0.75″ x 0.75″. MATERIAL: 7075-T6 ALUMINUM.Supplied with a PTFE Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

12 HOLE REFERENCE STANDARD 4340 STEEL.Hole Sizes: 6.35mm, 5.54mm, 4.75mm, 3.96mm, 3.18mm, 2.36mm. (1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″), 0.5mm x 0.5mm x 0.15mm (.0197″ X .0197″ x.0059″)WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES 0.2mm, 0.5mm, 1.0mm DEEP 0.15mm WIDE +/- .0254mm(.001″). Includes Test Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES: .040″, .050″, .060″, .070″, .080″, .090″, .100″ +/- .001″. PAD SIZE: 1.0″x 1.0″, MATERIAL: 7075-T6 ALUMINUM SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES: .040″, .050″, .060″, .070″, .080″, .090″, .100″ +/- .001″. PAD SIZE: 1.0″x 1.0″, MATERIAL: 1018 CARBON STEEL SUPPLIED WITH ACETAL(DELRIN) HOLDING BLOCK. Includes Test Report and Certificate of Conformance.

Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner EDM notch in each of the through Holes and a 0.5mm x 0.5mm throught the thickness of each hole. 4 Rows total, 2 countersink Rows and two Non-Countersink Rows for a total of 44 holes. Material: 7075-T6 Aluminum 10mm Thick. Includes Test Report and Certificate of ConformanceTraceable to NIST.

Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner EDM notch in each of the through Holes and a 0.5mm x 0.5mm throught the thickness of each hole. 4 Rows total, 2 countersink Rows and two Non-Countersink Rows for a total of 44 holes. Material: 2024-T3 Aluminum 10mm Thick. Includes Test Report and Certificate of ConformanceTraceable to NIST.

Metric Aluminum multi-hole reference standard. Contains 11 hole sizes; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, and 20mm hole diameters. EDM notch = 0.5mm x 0.5mm deep corner EDM notch in each of the Countersink Holes, 1mm x 1mm corner EDM notch in each of the through Holes and a 0.5mm x 0.5mm throught the thickness of each hole. 4 Rows total, 2 countersink Rows and two Non-Countersink Rows for a total of 44 holes. Material: 6AL-4V Titanium. 10mm Thick. Includes Test Report and Certificate of ConformanceTraceable to NIST.

5 STEP WEDGE .030″, .050″, .070″, .090″, .110″. TOLERANCE +/-.001″. MATERIAL: 7075-T6 ALUMINUM .PAD SIZE: 75″ x .75″. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance.

CUSTOM 15 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: 3/16”(.188), 7/32”(.218),1/4”(.250), 9/32”(.281), 5/16”(.313), 3/8”(.375), 7/16”(.437), 1/2”(.500), 9/16”(.562), 5/8”(.625), 3/4”(.750), 13/16″(.8125″), 7/8″(.875″), 15/16″(.9375″) and 1.0″ Ø. EDM CORNER NOTCHES: .020 x .020 & .030 x .030. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

6 STEP CALIBRATION BLOCK, STEP SIZES .015″, .020″, .025″, .030″, .035″, .040″. MATERIAL: 625 Inconel. PAD SIZE: 1″ X 1″ X 6″ ± .001″. Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

6 STEP CALIBRATION BLOCK, STEP SIZES .015″, .020″, .025″, .030″, .035″, .040″. MATERIAL: 2024-T3 Aluminum. PAD SIZE: 1″ X 1″ X 6″ ± .001″. Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

6 STEP CALIBRATION BLOCK, STEP SIZES .015″, .020″, .025″, .030″, .035″ .040″. MATERIAL: 7075-T6 Aluminum. PAD SIZE: 1″ X 1″ X 6″ ± .001″. Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

Aluminum Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16″ (4.7625), 7/32″ (5.55625), 1/4″ (6.35), 9/32″ (7.14375), 5/16″ (7.9375), 11/32″ (8.73125), 3/8″ (9.525), 7/16″ (11.1125), 1/2″ (12.7), 9/16″ (14.2875), 5/8″ (15.875), 3/4″ (19.05), 7/8″ (22.225) 1″ (25.4). Material: Aluminium 7075-T6. Includes Test Report and Certificate of Conformance.

17-4PH Stainless Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16″ (4.7625), 7/32″ (5.55625), 1/4″ (6.35), 9/32″ (7.14375), 5/16″ (7.9375), 11/32″ (8.73125), 3/8″ (9.525), 7/16″ (11.1125), 1/2″ (12.7), 9/16″ (14.2875), 5/8″ (15.875), 3/4″ (19.05), 7/8″ (22.225) 1″ (25.4). Material: 17-4PH H1025 Stainless Steel . Includes Test Report and Certificate of Conformance.

4340 Steel Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16″ (4.7625), 7/32″ (5.55625), 1/4″ (6.35), 9/32″ (7.14375), 5/16″ (7.9375), 11/32″ (8.73125), 3/8″ (9.525), 7/16″ (11.1125), 1/2″ (12.7), 9/16″ (14.2875), 5/8″ (15.875), 3/4″ (19.05), 7/8″ (22.225) 1″ (25.4). Material: AISI 4340 Steel. Includes Test Report and Certificate of Conformance.

Titanium Multi Hole Test Block, Rotating Probe, x16 Hole, x16 Full Bore notch 0.2mm wide x 0.5mm deep -1 CONFIG, 3/16″ (4.7625), 7/32″ (5.55625), 1/4″ (6.35), 9/32″ (7.14375), 5/16″ (7.9375), 11/32″ (8.73125), 3/8″ (9.525), 7/16″ (11.1125), 1/2″ (12.7), 9/16″ (14.2875), 5/8″ (15.875), 3/4″ (19.05), 7/8″ (22.225) 1″ (25.4). Material: Ti6AI4V Titanium. Includes Test Report and Certificate of Conformance.

9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 4340 Steel. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

9 STEP WEDGE, 0.5mm, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .05mm. Material: 6AL-4V Titanium. Pad Size: 19mm x 19mm square Supplied with Acetal(Delrin) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

CUSTOM 5 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF 0.020″, 0.040″,0.060″, .080″, .100 +/-.001″. PAD SIZE 1.0″ x 1.0″ . Includes Test Report and Certificate of Conformance.

Custom Eddy Current Surface Standard with a Total of 12 EDM Notches. Notch Lenghs of .125, .250″, .375″ and .625″. Notch Depths of .008″, .020″, and .040″ for each length. Material: Nickel Aluminum Bronze. Includes Test Report and Certificate of Conformance.

Custom Boeing Eddy Current Hole Standard. Hole Sizes: .159 & .190″Ø. With one of each hole size plugged. Material: 2024-T3 Aluminum. Plugged holes contain a BACR15BA6A8C Rivet in the .056″ plate. Apply BMS 545 sealant between each layer Includes Test Report and Certificate of Conformance.

6 STEP CALIBRATION BLOCK, STEP SIZES .050″, .100″, .200″, .300″, .400″, .500″. MATERIAL: 625 Inconel. PAD SIZE: 1″ X 1″ X 6″ ± .001″. Supplied With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

CUSTOM 6 STEP CALIBRATION BLOCK. MATERIAL: 2219-T851 ALUMINUM. STEP THICKNESSES OF .025″, .030″, .035″, .040″, .045″, .050″ +/-.001″. PAD SIZE 1.0″ x 1.0″ . Includes Test Report and Certificate of Conformance.

8 Step Wedge For X-Ray . Material: 304 Stainless Steel. Step Sizes 0.125″, .250″, 0.375″, 0.500″, 0.625″, 0.750″, 0.875″, 1.00″. Tolerance ± .00078″ (0.02mm). Pad Size: 25mm x 25mm(1.0″ x 1.0″) Tolerance ± .0196″ (0.5mm). Surface Finish: Ra 0.8µm (32 µin)max. Includes Material Certs, Test report and Certificate of Conformance.

5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 304 nStainless Steel. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

5 STEP WEDGE,0.25mm, 0.50mm, 0.75mm, 1.00mm, 1.25mm, +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm square Supplied With Acetal(Delrin) Holding Block Includes Test Report Traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T3 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 2024-T42 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 304 Stainless Steel. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, 1.0mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm +/- .02mm. Material: 6AL-4V Titanium. Pad Size: 20mm x 20mm ±.05mm square Supplied With Acetal( Delrin ) Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

Custom 14 Step Block, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 9.0mm, 10.0mm, 14.0mm, 16.0mm, 40mm, 50mm and 60.0mm, Thickness Tolerance ±.05mm. Pad Size: 20mm X 20mm. Material: 4340 STEEL. Includes certification Report Traceable to NIST.

12 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (5/32, 3/16, 7/32,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH A .020″x.020″ and .030″x.030″ CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance

Titanium(6AL-4V) Multi-hole reference standard with certificate. Contains 20 holes; 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, 7/8″, 1.0″ inch. Each hole contains two EDM corner notches; 0.030 inch X 0.030 inch (0.762mm X 0.762mm) 0.020 inch X 0.020 inch (0.508mm X 0.508mm) Reference standard also contains 3 each Surface EDM notches; 0.010 inch (0.254mm), 0.020 inch (0.508mm) and 0.040 inch (1.01mm) deep). Includes Test Certificate traceable to NIST and Certificate of Conformance (COC).

Eddy Current Reference Standard. Dimensions: 4″ x 0.25″ x 1″ Material: Aluminum 7075-T7. Includes Test Report and Certificate of Conformance.

Custom Eddy Current Multi-Hole Reference Standard. Hole Diameters: 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5mm, 11.0 mm, 11.5 mm, 12.0 mm, 12.5 mm, 13.0 mm, 13.5 mm, 14.0 mm. Two (2) EDM notches per hole.Material: Aluminium 7075-T76. Includes Test Report and Certificate of Conformance.

Custom Eddy Current Hole Standard. Hole Diameters: 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm, 9.5 mm, 10.0 mm, 10.5 mm, 11.0 mm, 11.5 mm, 12.0 mm. Material: Aluminium 7050-T74. Includes Test Report and Certificate of Conformance.

1/8″ HOLE STANDARD IN 7075-T6 with .020″ x .020″ x .005″ CORNER EDM NOTCH. MATERIAL SIZE 2.0″ x 2.0″ x .375″. Includes Test Report and Certificate of Conformance.

CUSTOM SURFACE CALIBRATION BLOCK. MATERIAL: 7075-T73 ALUMINUM. 3 EDM NOTCH SIZES: 2.0mm(.078″) LONG x 0.1mm(.0039″) WIDE x 0.25mm(.010″) DEEP. 6.35mm(.25″) LONG x 0.1mm(.0039″) WIDE x 0.5mm(.019″) DEEP. 1.5mm(.059″) LONG x 0.1mm(.0039″) WIDE x 0.76mm(.029″) DEEP. +/- .05mm. Includes Test Report and Certificate of Conformance.

6 STEP CALIBRATION BLOCK, .5mm, 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm. ± .001, 3/4X3/4 FACE, 1018 CARBON STEEL Includes Test Report and Certificate of Conformance.

CUSTOM HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2″ PLATE. Holes diameters: 5/32″, 6/32″, 13/64″, 8/32″, 17/64″. 1st row – holes without defects. 2nd row – holes with Corner notch – 0.5 mm. 3d row – holes with Full length thru notch – 0.5 mm depth. 4th row – holes with 100 degree countersinks without defects. 5th row – holes with 100 degree countersinks with 0.5 mm depth defects (0.5 mm defects on the countersink surface). Includes Test Report and Certicate of Conforma

CUSTOM METRIC HOLE STANDARD, 2024-T3 or 7075-T6 ALUMINUM 1/2″ PLATE. Holes diameters: 4 mm, 5 mm, 6 mm, 7 mm.. 1st row – holes without defects. 2nd row – holes with Corner notch – 0.5 mm. 3d row – holes with Full length thru notch – 0.5 mm depth. 4th row – holes with 100 degree countersinks without defects. 5th row – holes with 100 degree countersinks with 0.5 mm depth defects (0.5 mm defects on the countersink surface). Includes Test Report and Certicate of Conformance.

12 HOLE REFERENCE STANDARD 718 INCONEL. HOLE SIZES: 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″, 7/8″ .020″ x .005″ +/-.001″ THROUGH EDM NOTCH ON EACH HOLE. Includes Test Report and Certificate of Conformance.

7 STEP WEDGE .050″, .100″,. 150″, .200″, .250″, .300″, .350″. MATERIAL: 2050 ALUMINUM. PAD SIZE: 1.0″ x 1.0″ TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

7 STEP WEDGE .050″, .100″,. 150″, .200″, .250″, .300″, .350″. MATERIAL: 2195 ALUMINUM. PAD SIZE: 1.0″ x 1.0″ TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

7 STEP WEDGE .050″, .100″,. 150″, .200″, .250″, .300″, .350″. MATERIAL: 6061 ALUMINUM. PAD SIZE: 1.0″ x 1.0″ TOLEREANCE = +/- .001. Supplied With Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.

5 STEP WEDGE, 10mm, 20mm, 30mm, 40mm, 50mm, +/- .05mm. Material: 7075 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance.

CUSTOM 4 STEP METRIC CALIBRATION BLOCK. MATERIAL: 304 STAINLESS STEEL. STEP SIZES: 5mm, 10mm,15mm and 20mm. PAD SIZE: 20mm x 20mm, Includes Test Report traceable to NIST and Certificate of Conformance.

EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 6AL-4V TITANIUM. SIZE: 2.0″ Wide X 4.0″ Wide. Includes Test Report and Certificate of Conformance.

EDDY CURRENT SUIRFACE STANDARD WITH A TOTAL OF THREE A3 TYPE SURFACE NOTCHES ORIENTATED AT 0°, 45° and 90°. MATERIAL: 718 INCONEL SIZE: 2.0″ Wide X 4.0″ Wide. Includes Test Report and Certificate of Conformance.

EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010″(0.254mm), .020″(0.508mm), .050″ (1.27mm) (.004″W +/- .001). Material: Non-Magnetic 304 Stainless Steel. SIZE: 1.0″W x 3.0″L x .25″. Includes Test Report and Certificate of Conformance.

EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .010″(0.254mm), .020″(0.508mm), .050″ (1.27mm) (.004″W +/- .001). Material: 6AL-4V Titanium. SIZE: 1.0″W x 3.0″L x .25″. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK SUPPLIED WITH DELRIN HOLDING BLOCK, STEP SIZES: .015″, .025″, .035″, .045″, .055″, .065″, .075″, .085″, .095″,.105″. PAD SIZE: 1.0″ x 1.0″. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance

Aluminum Multi-hole reference standard. Material: 7075-T6 Aluminum. Contains 10 hole sizes; 1/8 inch (3.175mm), 3/16 inch (4.74mm),1/4 inch (6.35mm), 5/16 inch (7.92mm), 3/8 inch (9.52mm), 7/16 inch (11.09mm), 1/2 inch (12.7mm), 9/16 inch (14.27mm), 5/8 inch (15.87mm), 3/4 inch (19.05mm); Each hole contains a 0.020″ (+/-10%) surface to surface thru EDM notch and a .030 x .030 Corner EDM Notch. Item also contains 3 surface flaws 0.750 inch long X 0.040 inch, 0.020 inch & 0.010 inch deep and .007″ Max Width. Includes Test Report and Certificate of Conformance.

Metric 6 Step Wedge, 2mm, 4mm, 6mm, 8mm, 10mm, 20mm ± .5mm, Pad Size: 25mm X 25mm. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

Metric 5 Step Wedge, 5mm, 10mm, 15mm, 20mm, 25mm ± .5mm, Pad Size: 25mm X 25mm. Material: 316 Stainless Steel. Includes Test Report and Certificate of Conformance.

Metric 5 Step Wedge, 5mm, 10mm, 15mm, 20mm, 25mm ± .5mm, Pad Size: 25mm X 25mm. Material: 4340 Carbon Steel. Includes Test Report and Certificate of Conformance.

METRIC 5 STEP WEDGE, 10mm, 15mm, 20mm, 25mm, 30mm +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 25mm x 25mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

SURFACE STANDARD MATERIAL: 7075-T6 or 2024-T3 ALUMINUM. EDM SLOT (0.5mm(.020″) DEEP) x (0.13mm(.05″) WIDE) +/-.03mm. BLOCK SIZE 3.50″ X 1.0″ X .50 Includes Test Report and Certificate of Conformance.

5 STEP THICKNESS STANDARD. STEP SIZES: .010″, .020″, .030″, .040″, .050″, +/-.001″. MATERIAL: 4340 STEEL. PAD SIZE .75″ X .75″ WITH HOLDER. Includes Test Report and Certificate of Conformance.

4 STEP CARBON STEEL WEDGE. STEP THICKNESS OF: 1.000”, 2.000”, 4.000”, 6.000” +/-.001″. 1.0″ x 1.0″ Pad Size. Material: 1018 Carbon Steel. Includes Certification Report traceable to NIST.

8 STEP WEDGE, STEP SIZES: .030″, .040″, .050″, .060″, .070″, .080″, .090″, and .100″ +/- .001″. PAD SIZE: 1.0″ x 1.0″ Supplied With Delrin Holding Block. MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

8 STEP WEDGE, STEP SIZES: .030″, .040″, .050″, .060″, .070″, .080″, .090″, and .100″ +/- .001″. PAD SIZE: 1.0″ x 1.0″ Supplied With Delrin Holding Block. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance.

8 STEP WEDGE, STEP SIZES: .030″, .040″, .050″, .060″, .070″, .080″, .090″, and .100″ +/- .001″. PAD SIZE: 1.0″ x 1.0″ Supplied With Delrin Holding Block. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance.

8 STEP WEDGE, STEP SIZES: .030″, .040″, .050″, .060″, .070″, .080″, .090″, and .100″ +/- .001″. PAD SIZE: 1.0″ x 1.0″ Supplied With Delrin Holding Block. MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

6 STEP WEDGE 0.050”, 0.100”, 0.200”, 0.350”, 0.500”, 0.750”, +/-.001″, Material: 1018 Steel 0.75″ x 0.75″ Pad Size. Includes Test Report and Certificate of Conformance.

10 STEP WEDGE 0.050”, 0.100”, 0.200”, 0.350”, 0.500”, 0.750”, 1.000″, 2.000″, 4.000″, 6.000″. +/-.001″, Material: 1018 Steel 1.0″ x 1.0″ Pad Size. Includes Test Report and Certificate of Conformance.

8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm, 20mm. (Tolerance: +/-0.02mm).- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance.

Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020″ x .020″ +/- .002″, and one EDM Surface Notch .030 deep x .015″ wide +/- .002 . Block Size = 3.75″ x 1.0″ x .25″. Includes Test Report and Certificate of Conformance.

Custom Calibration Block, 7050-T7 Aluminum. Hole Diameter .310 Ø Contains one EDM Corner Notch .020″ x .020″ +/- .002″, and one EDM Surface Notch .030 deep x .015″ wide +/- .002 . Block Size = 3.75″ x 1.0″ x .25″. Includes Test Report and Certific…

5 STEP WEDGE .020″, .040″, .060″, .080″, .120″. MATERIAL: 360 BRASS. PAD SIZE: 75″ x .75″. Supplied with Delrin Holding Block. Includes Test Report traceable to NIST and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES OF .100″, .200″, .300″, .400″, .500″, .600″, and .700″ +/- .001″. PAD SIZE: 1.0″ x 1.0″, MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES OF .100″, .200″, .300″, .400″, .500″, .600″, and .700″ +/- .001″. PAD SIZE: 1.0″ x 1.0″, MATERIAL: 6061-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES OF .100″, .200″, .300″, .400″, .500″, .600″, and .700″ +/- .001″. PAD SIZE: 1.0″ x 1.0″, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

CUSTOM 19 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737 PT 6 51-00-00 Procedure16 Figure 3 , 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Total of 19 Hole Sizes: .128″, .159″, .189″, .206″, .221″, .252″, .269″, .284″, .315″, .331″, .346″, .378″ , 7/16″(.438), 1/2″(.500), 9/16″(.563), 5/8″(.625), 3/4″(.750), 7/8″(.875), 1.00″. Total of 38 Corner EDM Notches: .020 x .020 x .005″ & .030 x .030 x .005″ ± .002″. MATERIAL: 7075-T6 ALUMINUM. Dimensions: 7.0″ x 5.0″ x .250″ Includes Test Report and Certificate of Conformance.

EDDY CURRENT SURFACE REFERENCE STANDARD. Cadmium plated on one side to AMS-QQ-P-416-f Type 1, Class 2. 3 EDM FLAWS ON BOTH SIDES. ONE SIDE UNPLATED(BARE). NOTCH DEPTHS : .008″, .020″, .040″. NOTCH WIDTH: (.004″W +/- .002). MATERIAL: 4340 STEEL. SIZE: 1.0″W x 4.0″L x .500″H. Includes Test Report and Certificate of Conformance.

Calibration standard, Aluminium alloy 2024-T3, rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in. (28.58 mm), 1.5/16 in. (33.34 mm), 1.1/2 in. (38.10 mm), 1.11/16 in. (42.86 mm), 2.1/8 in. (53.98 mm), 2.1/4 in. (57.15 mm) diameters. Includes Test Report and Certificate of Conformance.

Calibration standard, 6Al-4v Titanium , rotary (dynamic) eddy current testing, cross-drilled hole type per BAe 146 Ref. NTM Part 6,20-00-00), for diameters of (5/16 in. (7.94 mm), 13/16 in. (20.64 mm), 7/8 in. (22.23 mm), 1.1/16 in. (26.99 mm), 1.1/8 in. (28.58 mm), 1.5/16 in. (33.34 mm), 1.1/2 in. (38.10 mm), 1.11/16 in. (42.86 mm), 2.1/8 in. (53.98 mm), 2.1/4 in. (57.15 mm) diameters. Includes Test Report and Certificate of Conformance.

Custom Eddy Current Bolt Hole Calibration Standard. Total of 35 Hole Sizes: Diameters 3.0mm, 3.2mm, 4.0mm, 4.2mm, 4.6mm, 5.0mm, 5.4mm, 5.8mm, 6.2mm, 6.6mm, 7.0mm, 7.4mm, 7.8mm, 8.0mm, 8.2mm, 8.6mm, 9.0mm, 9.4mm, 9.8mm, 10.2mm, 10.6mm, 11.0mm, 11.4mm, 11.7mm, 12.2mm, 12.6mm, 13.0mm, 13.4mm, 13.8mm, 14.2mm, 14.6mm, 15.0mm, 15.4mm, 16.0mm, 16.4mm, 16.8mm. EDM Corner Notch in each Hole 1mm x 1mm x 0.15 Wide ±.03(.006″ ±.001″). Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

4 STEP THICKNESS STANDARD. STEP SIZES: .050″, .100″, .150″, .250″. +/-.001″. PAD SIZE .75″ x .75″. MATERIAL: C-110 Copper. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK, Step Pad Thicknesses: .010″, .020″, .040″, .060″, .080″, .100″, .150″, .200″, .250″, .300″, +/-.001″ . Material: Anodized 7075-T6 ALUMINUM, Pad Size: .75″ x 75″ with Acetal( Delrin) holding block. Includes Test Report and Ce…

Titanium Multi-hole reference standard. Material: 6AL-4V Titanium. Contains 12 hole sizes; 3/16 inch (4.74mm) 7/32 inch (5.53mm) 1/4 inch (6.35mm) 9/32 inch (7.13mm) 5/16 inch (7.92mm) 11/32 inch (8.71mm) 3/8 inch (9.52mm) 7/16 inch (11.09mm) 1/2 inch …

Custom Metric 6 Step Wedge. Step Thicknesses of 10mm, 15mm, 20mm, 25mm, 30mm, 35mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and Certificate of Conformance.

Custom Metric 7 Step Wedge. Step Thicknesses of 1mm, 2mm, 4mm, 6mm, 8mm, 10mm, 15mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and Certificate of Conformance.

Custom Metric 11 Step Wedge. Step Thicknesses of 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 15mm. (Tolerance: +/- 0.02mm). Pad Size: 19mm X 19mm, (Tolerance: +/- 0.5mm) Material: 1018 Steel. Includes Certification Report Traceable to NIST and Certificate of Conformance.

8 STEP ALUMINUM WEDGE, STEP SIZES: .150″, .175″,.195″, .215″, .245″, .285″, .310″, and .330″ +/- .001″. PAD SIZE: 1.0″ L x .75″ W, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

5 STEP WEDGE, STEP THICKNESSES OF .100″, .150″, .200″, .250″, .300″. TOLERANCE +/-.001″. MATERIAL: MAGNESIUM. PAD SIZE:75″x.75″. Includes Test Report traceable to NIST and Certificate of Conformance.

8 STEP THICKNESS STANDARD. STEP SIZES: .039″, .078″, .117″, .156″, .195″, .234″, .273″, .312″ +/-.001″. PAD SIZE 0.75″ x 0.75″. MATERIAL: 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance.

EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCH .020″(0.5mm), (.004″W +/- .002), 17-4PH STEEL. SIZE: 1.0″W x 3.0″L x .25″.Includes certification Report Traceable to NIST and Certificate of Conformance(COC).

Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Airbus Specification 51-63-04. Total of 14 Hole Sizes x 4 For a Total of 56 Holes: Diameters 13.5mm(.531″), 14.1mm(.555″), 14.3mm(.563″), 15.0mm(.591″), 15.8mm(.622″), …

Custom Eddy Current Bolt Hole Calibration Standard Manufactured in Accordance with Boeing Specification 51-00-00. Total of 14 with 28 EDM Notches. Hole Sizes: Diameters 13.5mm(.531″), 14.1mm(.555″), 14.3mm(.563″), 15.0mm(.591″), 15.9mm(.625″), 16.7mm(…