Shop

This is where you can browse products in this store.

Showing 701 – 800 out of 100

Page 36 out of 1

Part Number Description Equivalents Action
10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020″, .040″, .60″, .80″, .100″, .120″, .140″, .160″, .180″, .200″ +/-.001″. Material: 7075-T6 ALUMINUM. PAD SIZE: .75″ x .75″. Includes Test Report and Certificate of Conformance.
15 HOLE REFERENCE STANDARD, Material: 7075-T6 Aluminum. Hole Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.0. A Total 15 Mid-bore notch @ 0.030″ deep x 0.004″ wide x 0.060″ long in each hole. 3 Surface EDM No…

MHS-15-1A-3
Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 2024-T3 Aluminum. Includes Certification.

EC-CNDT-213444
Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification.

EC-CNDT-221804
CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM… STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance.
CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75″ x .75″ FACE. STEP THICKNESSES OF 0.025″, 0.040″ and 0.060″ +/-.001″. Includes Test Report and Certificate of Conformance.
6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001″, Material: 2024-T3 Aluminum. Pad Size: 0.75″ x 0.75″ , BLOCK SIZE: 4.50″ L x .750″W SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance.
6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001″, Material: 7075-T6 Aluminum. Pad Size: 0.75″ x 0.75″ , BLOCK SIZE: 4.50″ L x .750″W SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance.
CUSTOM ETHER NDE TEST BLOCK, PER SPEC
PROBE GUIDE FOR BOEING 747 PT 6 53-30-05. Material Delrin. Includes Test Report and Certificate of Conformance.

N/A
COMPOSITE STEP WEDGE SOLID CFRP TAPE, BMS 8-276 Cytec. PAD SIZE: 3.0″ WIDE by 2.0″ LONG. STEP SIZES .100” to 1.0” in INCREMENTS of .100″.
12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V Titanium.Hole Sizes: (3/16″, 7/32″ ,1/4″, 9/32″, 5/16″,11/32″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″), .020″ X .005″ WIDE +/-.001″ THROUGH EDM NOTCH IN EACH HOLE. Includes Test Report, Conductivity and Certi…
ASTM DISTANCE AMPLITUDE SET OF 19 7075-T6 ALUMINUM (CASE INCL) 3/34″, 5/64″ and 8/64″ FLAT BOTTOM HOLES

200129-1
CUSTOM REFERENCES STANDARD PER AMS4083
Custom 20 ply 12″ x 12″ CFRP Test Panel with 4 random defects(grafoil delaminations) between the ply layup in random locations. Autoclave cured per Boeing Specification BAC 5317. Includes C-Scan image to identify defects and Certificate of Conformance.
CALIBRATION BLOCK 70/30 COPPER-NICKEL

NDE005
CALIBRATION BLOCK 1018 CARBON STEEL

NDE005
CALIBRATION BLOCK 2205 SS (DUPLEX)

NDE005
CALIBRATION BLOCK 303 STAINLESS STEEL

NDE005
SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008″, .020″, .040″ EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL…CRJ200 PART1 51-20-06 PG.9
DELRIN BLOCKS W/ TOE CLAMPS .500-.030 STEP BLOCKS
Eddy Current Crack Standard Magnesium AZ-31
Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista…
Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista…
Form Fitted Wood Case for IIW Type 1 Calibration Block
ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 “x 4″x 12”. Contains 2″ diameter hole and 4″ radius. Also, 1/8″ x 1″ radius alternate reflector and 1/16″ deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a…

CB-01-AL

802048A
IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 “x 4″x 12”. Contains 2″ diameter hole and 4″ radius. Also, 1/8″ x 1″ radius alternate reflector and 1/16″ deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW…
Meets AS-5282 and ASTM E1444 requirements. 12 Pre-drilled holes simulate subsurface discontinuities Verifies magnetic particle system performance when actual test parts with discontinuities are not available Forms surface indications at various magnet…
PLUG – 54-10-33
CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040′) , .76mm(.030″), .2mm(.008″) deep x .1mm(.004″) wide +/- .002″. Includes Test Report and Certificate of Conformance.
ROMPAS BLOCK, 7075-T6 ALUMINUM ½” (12.5mm) or 1″ (25.4 mm) thick, 1″ radius opposite 2″ radius, with 5/64″ diameter side drilled hole (3/4″ deep flat bottom hole in 1″ thick version). SPECIFICATION: ASTM E-164. (Includes wooden case)
FAIRCHILD REFERENCE STARDARD FOR THE SA227 DOOR use fastener MS2042AD4-10
EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc…

SRS-082A-1
EDDY CURRENT SURFACE BLOCK 4130 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Includes …

SRS-082S-1
SURFACE STANDARD ALUMINUM(2024-T351) 1 EDM SLOT (0.040 DEEP)

SRS-4A

SRS-4A
SURFACE STANDARD STEEL 4340 1 EDM SLOT (0.40 DEEP)

SRS-4S

SRS-4S
SURFACE STANDARD TITANIUM 1 EDM SLOT (0.40 DEEP)

SRS-4A
CUSTOM REFERENCES STANDARD PER AMSS5564
TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(.800″THICK, 3.56″ OUTSIDE RADIUS WITH A 1.312″ BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100″ x .100″ CORNER NOTCHES)
TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(1.500″ THICK, 3.56″ OUTSIDE RADIUS WITH A 1.312″ BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100″ x .100″ CORNER NOTCHES)
CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188″, .219″, .250″,.282″, 313″, .344″, .375″ .438″ .500″,.563″, .625″, .688″ Ø MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.
CUSTOM 12 HOLE REFERENCE STANDARD PER BOEING SPECIFICATION STANDARD 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. Hole Sizes: .188″, .219″, .250″,.282″, 313″, .344″, .375″ .438″ .500″,.563″, .625″, .688″ Ø MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.
.080″ THREADED DELAY TIP FOR THE AFP SERIES PENCIL TRANSDUCERS
10 MHZ .125″ dia focused Straight shaft pencil transducer with a .080″ Replaceable tip. Standard microdot connector

HC-398-RDL-L
10 MHZ 90° .125″Ø diameter focused pencil transducer with a .060″ Replaceable tip. Standard microdot connector. Includes Test Report and Certificate of Conformance.
15 MHZ .125″ dia focused Straight shaft pencil transducer with a .080″ Replaceable tip. Standard microdot connector

V260-SM

V260-SM
15 MHZ .125″Ø dia focused 45° shaft pencil transducer with a .060″ Replaceable tip, supplied with a microdot connector. Includes Test Report and Certificate of Conformance.

V260-45
15 MHZ 90° SHAFT .125″ dia focused pencil transducer with a .060″ Replaceable tip. Standard microdot connector

V260-RM

930811
7.5MHZ .125″ dia. High Resolution focused Straight shaft pencil transducer with a .080″ Replaceable tip. Standard microdot connector. ( K-PEN style )

389-042-200
7.5MHZ 90° angle head. High Resolution .125″ dia focused pencil transducer with a .080″ Replaceable tip. Standard microdot connector. K-PEN Style

389-042-870
.080″Ø DELAY TIP FOR AFP SERIES PENCIL TRANSDUCERS. 1/4-36 THREAD. Includes Test Report and Certificate of Conformance.

U8411019

HAX-398
.060″ DELAY TIP FOR AFP SERIES SONOPEN TYPE PENCIL TRANSDUCERS. 1/4-36 THREAD. Includes Test Report and Certificate of Conformance.
HOLE PROBE 100KHZ – 2 MHZ, 1.1″ WL

SPO156-187
70° ANGLE BEAM TRANSDUCER in ALUMINUM, 2.25MHz .25″ x .25″ ELEMENT, CASE SIZE( .550″L x .310″W x .675″ H) SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of conformance.

PAB-0204-70-AL-SM
5MHZ 28° SHEAR WAVE IN TI, 1.97 LEFT SIDE
5MHZ 28° SHEAR WAVE IN TI, 1.97 RIGHT SIDE
35° SHEAR WAVE IN TI, 1.97 RIGHT SIDE SCANNING
35° SHEAR WAVE IN TI, 1.97 RIGHT SIDE SCANNING
STAVELEY 45 DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz 187″ x .187″ ELEMENT SIDE MOUNT MICRODOT CONNECTOR

PAB-0503-45

TEK-0503-45AT
Mini Angle Beam Transducer, 5.0MHz, 0.187″ x 0.187″ Element, 45° Shear in Aluminum, Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance.

PAB-0503-45

TEK-0503-45AT
Mini Angle Beam Transducer, 5.0MHz, 0.187″ x 0.187″ Element, 70° Shear in Aluminum, Side Mount Microdot Connector. Includes Test Report and Certificate of Conformance.

PAB-0503-70

TEK-0504-70AS

PD-238-26
Mini Angle Beam Transducer, 5.0MHz, 0.187″ x 0.187″ Element, 70° Shear in Aluminum, Top Mount Microdot Connector. Includes Test Report and Certificate of Conformance.

PAB-0503-70

TEK-0503-70AT
Mini Angle Beam Transducer, 5.0MHz, 0.187″ x 0.187″ Element, 90° Shear in Steel, Side Mount Microdot Connector. Includes Test Report and Certificate of Conformance.

PAB-0503-90-ST-RM
5MHZ 28° REFRACTED L WAVE 1.125″ R. Includes Test Report and Certificate of Conformance.
60° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .187″ x .25″ ELEMENT, CASE SIZE( .47″L x .31″W x .55″ H) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

PAB-0504-40
OLYMPUS 45° DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz .25″ x .25″ ELEMENT SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: .550″ L x .310″ W x .675″H. Includes Test Report and Certificate of Conformance.

PAB-0504-45-AL-RM
OLYMPUS 45° DEGREES IN ALUMINUM SHEAR WAVE TRANSDUCER 5MHz .25″ x .25″ ELEMENT TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .550″ L x .310″ W x .675″H. Includes Test Report and Certificate of Conformance.

PAB-0504-45-AL-SM
OLYMPUS 45° DEGREES IN STEEL SHEAR WAVE TRANSDUCER 5MHz .25″ x .25″ ELEMENT SIDE MOUNT MICRODOT CONNECTOR. CASE SIZE: .550″ L x .310″ W x .675″H. Includes Test Report and Certificate of Conformance.

PAB0504-45ST-RM

TEK-0504-45ST
OLYMPUS 45° DEGREES IN STEEL SHEAR WAVE TRANSDUCER 5MHz .25″ x .25″ ELEMENT TOP MOUNT MICRODOT CONNECTOR. CASE SIZE: .550″ L x .310″ W x .675″H. Includes Test Report and Certificate of Conformance.

PAB0504-45ST-SM
60° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25″ x .25″ ELEMENT, CASE SIZE( .550″L x .310″W x .675″ H) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

PAB-0504-60-AL-RM
70° ANGLE BEAM TRANSDUCER in ALUMINUM, 5MHz .25″ x .25″ ELEMENT, CASE SIZE( .550″L x .310″W x .675″ H) SIDE MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

PAB-0504-70-AL-RM
70° ANGLE BEAM TRANSDUCER in STEEL, 5MHz .25″ x .25″ ELEMENT, CASE SIZE( .550″L x .310″W x .675″ H) SUPPLIED WITH A TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.
70° ANGLE BEAM TRANSDUCER in STEEL, 5MHz ..187″ x .25″ ELEMENT, CASE SIZE( .550″L x .310″W x .675″ H) TOP MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.

PAB-0504-70ST-SM
5MHZ 28° REFRACTED SHEAR WAVE 1.125″ R. Includes Test Report and Certificate of Conformance.
5MHZ 51° SHEAR WAVE IN ALUMINUM. CASE SIZE .50″ W x .80″L x .37″H, REFERENCE STANDARD NDT624

XAB-6056
5MHZ 32° SHEARWAVE IN ALUMINUM. CASE SIZE .50″X.80″L. HEIGHT TAPERS FROM .20″H FRONT TO .32″ H BACK. REFERENCE STANDARD IS NDT624

XAB-6057
5MHZ BACKSHOOTER IN TI .25″ ELEMENT, CASE SIZE .300HX.300WX.500L
50° TITANIUM HARDWIRED CABLE. MODIFIED VERSION OF AFS-0501L
50° TITANIUM HARDWIRED CABLE. MODIFIED VERSION OF AFS-0501R
5MHZ 45° SHEARWAVE. SCANS TOWARDS THE LEFT. LOW PROFILE TRANSDUCER
5MHZ 45° SHEARWAVE. SCANS TOWARDS THE RIGHT. LOW PROFILE TRANSDUCER
5MHZ 45° SHEARWAVE WITH 34° COMPOUND ANGLE. SCANS TOWARDS THE LEFT. LOW PROFILE TRANSDUCER
5MHZ 45° SHEARWAVE WITH 34° COMPOUND ANGLE. SCANS TOWARDS THE RIGHT. LOW PROFILE TRANSDUCER
CUSTOM BOEING ANGLE BEAM TRANSDUCER, 50°, 5MHz, .187″ x.187″ ELEMENT WITH TOP MOUNTED MICRODOT CONNECTOR. .550″ x .26″ x .450″ USED WITH NDT596 . Includes Test Report and Certificate of Conformance.
10 MHz .187x.187 element L-Wave transducer 19 degree incident angle, 1.569R. Case size: .50Lx.26Wx.425H top mount connector
CUSTOM ANGLE BEAM TRANSDUCER 5MHZ 45° in Al .25″X.25″ELEMENT. 690″L x .590″H x .300″W WITH END MOUNT MICRODOT CONNECTOR. Includes Test Report and Certificate of Conformance.
5MHZ 45° CUSTOM TRANSDUCER, AL, 2.9″LX.900″WX1.75″H
5 MHz shear wave transducer .25″ x .25″ square element. 1.025 radius top mount connector. used with NDT3238 ref. standard
5 MHz COMPOUND SHEARWAVE TRANSDUCER USED FOR LEFT SIDE EDM BORE NOTCH ON NDT3242
5 MHz COMPOUND ANGLE SHEARWAVE TRANSDUCER WITH A 2.275 INCH RADIUS. USED TO SCAN NEAR SIDE EDM NOTCH ON NDT3243
5 MHz SHEARWAVE TRANSDUCER USED TO SCAN MID BORE EDM NOTCH ON NDT3242 and NDT3243, 35° INCIDENT ANGLE
42.5° SHEAWAVE TRANSDUCER, 5MHZ OUTER LUG INSPECTION, LOW PROFILE SIDE MOUNT CONNECTOR
33.5° 5MHZ SHEARWAVE TRANSDUCER, NOSE AERA OF LUG, LOW PROFILE SIDE MOUTN TRANSDUCER
5MHz 45 deg in steel angle beam transducer. ( .500″L x .300″W x .425″H)
5MHz 60 deg in steel angle beam transducer. ( .500″L x .300″W x .425″H)
CUSTOM ANGLE BEAM TRANSDUCER. 5MHz 45 DEG. IN ALUMINUM TOP MOUNT CONNECTOR. CASE SIZE(.230″L x .350″W x .500″H)
CUSTOM MULTI SHOE TRANSDUCER 45 DEG. IN ALUMINUM 5MHz. (15, 0, 15, DEGREE OFF SETS)
5MHZ SHEARWAVE TRANSDUCER, 45°, STEEL, .187″ x .250″ ELEMENT. CASE SIZE .380″L,x .300″WX.500H,
5MHZ SHEARWAVE TRANSDUCER, 60°, STEEL, .187″ x .500″ELEMENT. CASE SIZE, .380″Lx.300″WX.500H
CUSTOM SHEARWAVE TRANSDUCER, 5MHZ, LEFT SIDE, FOR NDT6052