Shop

5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100″, .200″,. 350″, .500″, 1.000″ MATERIAL: 1018 Carbon Steel. Pad Size: 0.750″ X 0.750″ TOLEREANCE = +/- .002. NICKEL PLATED CORROSION RESISTANT COATING. Includes measure…

5 Step Wedge Manufactured in Accordance with ASTM E797/E797M-15.Step Sizes: .100″, .200″,. 350″, .500″, 1.000″ MATERIAL: 304 Stainless Steel. Pad Size: 0.750″ X 0.750″ TOLEREANCE = +/- .002. Includes measurement Certification for the .750″ Block wi…

11 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 9/16), WITH .050″x.050″ .005±.001 CORNER EDM NOTCH IN EACH HOLE.

Eddy Current Surface Standard Carbon Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0″(127mm)L x 2.0″(50.8mm)W x .25″(6.35mm). Includes Test Report and Certificate of Conformance.

Eddy Current Surface Standard 316 Steel. 0.5mm, 1.0mm,2.0mm Deep x .15mm Wide +/- .05mm. Block Size: 5.0″(127mm)L x 2.0″(50.8mm)W x .25″(6.35mm). Includes Test Report and Certificate of Conformance.

• Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”..• Each hole contains a 0.050” x 0.050” corner notch at the bottom of th…

• Each standard is 6” long x 3” wide x 1/2” thick. Contains14 holes with diameters of: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8” & 3/4”• Each hole contains a 0.050” x 0.050” corner notch at the bottom of the countersink and a 0.030” x 0.030” corner notch at the bottom of the hole. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

Tapered Aluminum Standard. Material: 2024-T351 Aluminum. Taper: 0.039″-0.164″. Dimensions: 1″ x 4″ x .25″. Slot width = 0.75″. Includes Test Report.

Liquid Penetrant Standard. Meets the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3” x 2” x 3/8” thick. A 1/8″ wide groove separates the blocks two sides to facilitate side-…

3 HOLE REFERENCE STANDARD. MATERIAL: 4130 CRES STEEL. HOLE SIZES: 3/16, 1/4, 5/16 TOTAL OF 3 EDM THROUGH NOTCHES .020 DEEP x .006″ WIDE. Includes Certification Report.

8 HOLE REFERENCE STANDARD, MATERIAL: 2024-T3 ALUMINUM., HOLE SIZES: 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, .020″ THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance.

8 HOLE REFERENCE STANDARD, MATERIAL: 2024-T3 ALUMINUM., HOLE SIZES: 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, .020″ THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance.

8 HOLE REFERENCE STANDARD 6AL-4v TITANIU., HOLE SIZES: 1/8″, 5/32″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, .020″ THROUGH NOTCH .005+/-.001. Includes Test Report and Certificate of Conformance.

BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), DEPTH TOLERANCE = +/- .001″(+/- .003mm). MATERIAL 2024-T3 ALUMINUM. SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificate of…

BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), DEPTH TOLERANCE = +/- .001″(+/- .003mm). MATERIAL 6061-T6 ALUMINUM, IACS 40.00-44.80. SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificate of Conformance.

BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), DEPTH TOLERANCE = +/- .001″(+/- .003mm). MATERIAL 2024-T6 ALUMINUM, SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificate of …

BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), DEPTH TOLERANCE = +/- .001″(+/- .003mm). MATERIAL 4130/4340 CRES STEEL. SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificat…

BOMBARDIER EDDY CURRENT SURFACE REFERENECE STANDARD. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), DEPTH TOLERANCE = +/- .001″(+/- .003mm). MATERIAL: 304 STAINLESS STEEL. SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificat…

6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: 321 CRES STEEL. STEP SIZES: .008″,.020″,.050″, .080″, .100″ , .125″ +/-.005″. PAD SIZE = 1.0″ x 1.0″. Includes Test Report and Certificate of Conformance.

6 STEP REFERENCE BLOCK WITH HOLDER. MATERIAL: INCONEL. STEP SIZES: .008″,.020″,.050″, .080″, .100″ , .125″ +/-.005″. PAD SIZE = 1.0″ x 1.0″. Includes Test Report and Certificate of Conformance.

5 STEP WEDGE .200″, .300″, .400″, .500″, .600″. TOLERANCE +/-.001″. ..MATERIAL: 4340 or 4130 CARBON STEEL . PAD SIZE:75″x.75″. Includes Test Report traceable to NIST and Certificate of Conformance.

8 STEP WEDGE, STEP SIZES: 0.35mm 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm +/- .02mm. Material: 1018 Carbon Steel. Pad Size: 19mm x 19mm square. Includes Test Report Traceable to NIST and Certificate of Conformance.

Custom NDI standard for F-15C/D inspection. Material: 2124-T8 Aluminum. Includes Certification Report Traceable to NIST.

5 STEP WEDGE .050″, .070″, .090″, .110″, .130″. TOLERANCE +/-.001″. ..MATERIAL: MAGNESIUM. PAD SIZE:75″x.75″. Includes Test Report traceable to NIST and Certificate of Conformance.

CUSTOM 2 HOLE REFERENCE STANDARD. MATERIAL: 718 INCONEL, BLOCK SIZE: .500″ x 1.0″ x 4.0″ . HOLE SIZES: 5/16″, 9/32″ WITH -3( .030″ x .060″ x .005″ W MID-WALL NOTCH ‘

CUSTOM 13 HOLE REFERENCE 3 PLATE STANDARD, 7075-T6 ALUMINUM. HOLE SIZES: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1.0″. Includes Test Report and Certificate of Conformance.

CUSTOM HOLE REFERENCE STANDARD in 4130 OR 4340 STEEL; HOLE SIZES: 2 OF EACH SIZE HOLE FOR A TOTAL OF 4 HOLES. 2.5mm(.098″), ,3.5mm(.137″) , WITH A .030″x.030″ x .005″ +/-.002″ CORNER EDM NOTCH AND .020″ x .005″ THRU NOTCHES.

8 Step Wedge, Material: 2219 Aluminium per AMS4144.8 Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: ± 0.02mm). Pad Size: 15mm x 15mm (Tolerance: ± 0.5mm).Surface Finish: Ra 0.8 µm (32 µin.)max. Includes Test Report and Certificate of Conf…

Thin Material Step Wedge: 7075-T6 Aluminium, 5 Steps total (0.5mm, 1.00mm, 1.5mm, 2.00mm and 2.5mm). Step pad size: 19mm x 19mm. Includes Test Report and Certificate of Conformance.

17 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040″ +/- 10% x .005″ +/- .001″ Wide. Includes Test Report and Certificate …

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055″, .063″, .071″, .080″, .090″, .100″, .110″, .115″, .120″ .125″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

17 HOLE REFERENCE STANDARD 4130/4340 Carbon Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040″ +/- 10% x .005″ +/- .001″ Wide. Includes Test Report …

17 HOLE REFERENCE STANDARD 304 Stainless Steel, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16 and 3/4 diameters. Includes 15 Thru EDM Notches .040″ +/- 10% x .005″ +/- .001″ Wide. Includes Test Report and…

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012″, .016″, .020″, .025″, .032″, .036″, .040″, .045″, .050″ .055″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012″, .016″, .020″, .025″, .032″, .036″, .040″, .045″, .050″ .055″ +/-.001″ Pad Size: .75″ x 75″ . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .012″, .016″, .020″, .025″, .032″, .036″, .040″, .045″, .050″ .055″ +/-.001″ Pad Size: .75″ x 75″ . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055″, .063″, .071″, .080″, .090″, .100″, .110″, .115″, .120″ .125″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055″, .063″, .071″, .080″, .090″, .100″, .110″, .115″, .120″ .125″ +/-.001″ Pad Size: .75″ x 75″ . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .055″, .063″, .071″, .080″, .090″, .100″, .110″, .115″, .120″ .125″ +/-.001″ Pad Size: .75″ x 75″ . Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125″, .135″, .145″, .150″, .160″, .170″, .180″, .190″, .200″ .225″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125″, .135″, .145″, .150″, .160″, .170″, .180″, .190″, .200″ .225″ +/-.001″ Pad Size: .75″ x 75″ . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .125″, .135″, .145″, .150″, .160″, .170″, .180″, .190″, .200″ .225″ +/-.001″ Pad Size: .75″ x 75″ . Material: 4340M Carbon Steel. Includes Certification Report traceable to NIST.

8 Step Calibration Block, Material 7075-T6 Aluminum. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)…- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)…- Surface Finish: Ra 0.8 µm (32 µin) max…- Includes Certification Report a…

8 Step Calibration Block, Material 1018 Steel. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)…- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)…- Surface Finish: Ra 0.8 µm (32 µin) max…- Includes Certification Report and Cer…

8 Step Calibration Block, Material 6AL-4V Titanium. Steps: 0.5mm, 1mm, 2mm, 3mm, 4mm, 5mm, 7mm, 9mm. (Tolerance: +/-0.02mm)…- Pad Size: 19mm x 19mm (Tolerance: +/- 0.5mm)…- Surface Finish: Ra 0.8 µm (32 µin) max…- Includes Certification Report an…

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250″, .300″, .350″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .250″, .300″, .350″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST.

BOMBARDIER 10 STEP ALUMINUM WEDGE, PT 4 FIG. 2 PAGE 8. STEP THICKNESSES:, .024″, .028″, .031″, .035″, .039″, .044″, .048″, .052″, .056″ .059″ X.XXX +/-0.002, X.XX +/-0.010″. PAD SIZE: 1.0″ x 1.0″, Material: 2024-T3 Aluminum. Chromic anodize and 1 coat of CMS 565-01 primer on chem mill side only. Chemical mill from stock thickness 0.063” (1.60 Includes certification Report Traceable to NIST and Certificate of Conformance(COC).

Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

100° Countersink Multi Hole Standard. Contains 12 hole sizes: 3mm, 5mm, 7mm, 9mm, 11mm, 13mm, 14mm,15mm, 16mm 17mm,18mm and 19mm diameters. (1mm x 1mm x 0.15mm ± 0.03mm) Corner EDM Notches. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

6 FLAT BOTTOM HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. Hole Sizes: 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″ .060″ LONG X. 020″ x DEEP x .005″ WIDE +/- .001″ WIDE. Includes Test Report and Certificate of Conformance.

8 Step Calibration Block, Material 2024-T3 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 5.0mm, 7.5mm, 10mm. (Tolerance: +/-0.02mm).- Pad Size: 20mm x 20mm (Tolerance: +/- 0.5mm). Includes Certification Report and Certificate of Conformance.

5 STEP WEDGE. STEP SIZES: .040″, .100″, .150″, .250″, .350″. TOLERANCE +/-.001″. MATERIAL: 7075-T6 ALUMINUM . PAD SIZE: .75″ x .75″ . Includes Test Report traceable to NIST and Certificate of Conformance.

METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Per Airbus Procedure A 51-10-04. Material: 2024-T3 Aluminum. Includes Test Report and Certificate of Conformance.

METRIC 10 STEP CALIBRATION BLOCK, 0.6mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm ± .05mm. Pad Size: 20mm X 20mm. Material: 6AL-4V Titanium. Per Airbus Procedure A 51-10-04. Includes Test Report and Certificate of Conformance.

6 STEP WEDGE, 625 INCONEL. PAD SIZE: .787″ x .787″. STEP SIZES: 0.015″, 0.020″, 0.040″, 0.063″, 0.071″, 0.100″ +/-.001 TOLERANCE. Includes Test Report ancd Certificate of Conformance.

11 HOLE REFERENCE STANDARD IN 2024-T3 ALUMINUM; HOLE SIZES: (5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8,11/16, 3/4), WITH .020″ x .020″ x .005″ +/-.001″ CORNER EDM NOTCH IN EACH HOLE. Includes Certification Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES: .030″, .115″, .200″, .285″, .370″, .455″, and .540″ +/- .001″. PAD SIZE: .75″x.75″, MATERIAL: 2024-T3 ALUMINUM. Includes Test Report and Certificate of Conformance.

7 STEP WEDGE. STEP SIZES: .030″, .115″, .200″, .285″, .370″, .455″, and .540″ +/- .001″. PAD SIZE: .75″x.75″, MATERIAL: 7075-T6 ALUMINUM. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK .020″, .040″, .060″, .080″, .100″, .120″, .140″, .160″, .180″, .200″ +/-.001″ 7075-T6 ALUMINUM .75″ x .75″ STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK .020″, .040″, .060″, .080″, .100″, .120″, .140″, .160″, .180″, .200″ +/-.001″ 2024-T3 ALUMINUM .75″ x .75″ STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK .020″, .040″, .060″, .080″, .100″, .120″, .140″, .160″, .180″, .200″ +/-.001″ 6AL-4V TITANIUM .75″ x .75″ STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

10 STEP REFERENCE BLOCK .020″, .040″, .060″, .080″, .100″, .120″, .140″, .160″, .180″, .200″ +/-.001″ CARBON STEEL .75″ x .75″ STEP PAD With Delrin Holding Block. Includes Test Report and Certificate of Conformance.

CUSTOM 4 STEP WEDGE. MATERIAL: 7075-T6 ALUMINUM. STEP SIZES: .250″,.500″,.750″, 1.000″ +/-.001. PAD SIZE: .75″ x .75″. Includes Test Report Traceable to NIST.

BOEING REFERENCE STANDARD 737 PT 6 51-00-00 FIGURE 3 PG.9 & 777 PT 6 51-00-02 PAGE 7-8. HOLE SIZES: 1.000″, 1.250″ . Includes Test Report and Certificate of Conformance.

10 HOLE REFERENCE STANDARD 6AL-4V Titanium.Hole Sizes: (3/16″, 7/32″ ,1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 3/4″), .030″ X. 030″ x.005″ +/-.002″ WIDE & .020″ X. 020″ x.005″ +/-.002″ WIDE CORNER EDM NOTCH EACH HOLE and 3 SURFACE EDM NOTCHES .500…

7 STEP REFERENCE BLOCK. STEP SIZES: .025″,.040″, .063″, .071″, .100″,.125″,.200″ +/-.001″. MATERIAL: 2024-T6 ALUMINUM. PAD SIZE: .75″x.75″ .Includes Test Report and Certificate of Conformance

7 STEP CALIBRATION BLOCK. STEP SIZES: .020″, .040″, .060″, .080″, .100″, .150″, and .200″ +/- .010″. PAD SIZE: 1.0″ x 1.0″, MATERIAL: 321 CRES. Includes Test Report and Certificate of Conformance.

EDDY CURRENT SURFACE REFERENCE STANDARD, 321SS 3 EDM SLOTS (0.2mm, 0.5mm,1.0mm DEEP) x (0.05-0.25mm WIDE). Includes Test Report and Certificate of Conformance.

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 11.3mm(.445″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

4 STEP CALIBRATION BLOCK. STEP SIZES: .250″, .500″, .750″, 1.00″ ±.002, 3/4″ X 3/4″ PAD SIZE. MATERIAL: 1018 CARBON STEEL. Includes Test Report and Certificate of Conformance.

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 14.3mm(.563″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.1mm(.594″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

8 HOLE REFERENCE STANDARD IN 4130 CARBON STEEL; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020″x.020″ CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

8 HOLE REFERENCE STANDARD IN 7075-T6 ALUMINUM; HOLE SIZES: (1/8, 5/32, 3/16,1/4, 5/16, 3/8, 7/16, 1/2), WITH .020″x.020″ CORNER EDM NOTCH IN EACH HOLE. Includes Test Report and Certificate of Conformance.

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 15.9mm(.626″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.0mm(.630″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.3mm(.642″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 16.7mm(.657″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

5 Step Block. Material: 1018 Steel. Steps: 0.45mm, 0.50mm, 1.0mm, 2.5mm, 5.0mm. Tolerance: ± 0.02mm. Pad Size: 15.0mm x 15.0mm. Tolerance: ± 0.5mm. Surface Finish: Ra 0.8 µm (32 µin.) max. Supplied with Delrin Holding Block. Includes Test Report and Certificate of Conformance.

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 17.5mm(.689″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

Custom Bolt Hole Calibration Block, 7075-T651 Aluminum. Hole Diameter = 2 Holes 19.3mm(.760″)Ø each. Hole 1 = No EDM Flaws, Hole 2 = .030″ x .030″ x .004″ +/- .001″ EDM Notch. Block Size = 3.0″ x 1.5″ x .25″. Includes Test Report and Certificate of Co…

SURFACE REFERENCE STANDARD, ONE EDM NOTCH .030″ Deep x .040″ wide x .060 long ( +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 2.0″L x 2.0″W x .25″. Includes Test Report and Certificate of Conformance.

ALUMINUM TO ALUMINUM BONDED STANDARD. MATERIAL: 2024-T3 ALUMINUM, .063″/.040″ WITH A 1.0″ DISBOND. SIZE: 4.0″ X 4.0″. Includes Test Report and Certificate of Conformance.

13 HOLE REFERENCE STANDARD. MATERIAL: 7075-T6 ALUMINUM. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 23/32″. EACH HOLE CONTAINS A CORNER EDM NOTCH 030″ x .030″ x Width : 0.005″ +/- 0.002″. Includes Certif…

13 HOLE REFERENCE STANDARD. MATERIAL: 4130 or 4340 CRES STEEL. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 23/32″. EACH HOLE CONTAINS A CORNER EDM NOTCH 030″ x .030″ x Width : 0.005″ +/- 0.002″. Includes…

13 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V TITANIUM. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 23/32″. EACH HOLE CONTAINS A CORNER EDM NOTCH 030″ x .030″ x Width : 0.005″ +/- 0.002″. Includes Certifi…

2024-T3 Aluminum hole standard, hole diameter 5/32″, notch type .030 x .030″ Coner Notch”. Includes Test Report and Certificate of Conformance.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 7075-T6 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL certificate.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 2024-T3 Aluminum. Includes Certification Report traceable to NIST.

10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: AMS 4144, 2219-T8 Aluminum. Includes Certification Report traceable to NIST. Supply with MILL certificate.

10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 1018 OR 4340 Carbon Steel. Includes Certification Report traceable to NIST.

10 STEP STAINLESS STEEL WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 304 Stainless Steel. Includes Certification Report traceable to NIST.

10 STEP TITANIUM WEDGE. STEP THICKNESS OF , .100″, .200″, .300″, .400″, .500″, .600″, .700″, .800″, .900″ 1.000″ +/-.001″ Pad Size: .75″ x 75″ . Material: 6AL-4V Titanium. Includes Certification Report traceable to NIST.

BOEING REFERENCE STANDARD. PT 6 51-0-00. 13 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 5/32″, 3/16″, 1/4″, 7/32″, 9/32″ 5/16″ , 11/32″, 3/8″ ,7/16″, 1/2″, 9/16″, 5/8″, 3/4″. EACH HOLE CONTAINS A CORNER EDM NOTCH: 0.030″ x 0.030″ a…

4 STEP WEDGE .125″, .250″, .500″, .750″. TOLERANCE +/-.001″. MATERIAL: 6AL-4V TITANIUM. PAD SIZE: 750″ x .750″ . Includes Test Report traceable to NIST and Certificate of Conformance.

BOEING REFERENCE STANDARD. PT 6 51-0-00. 29 HOLE REFERENCE STANDARD. MATERIAL: 2024-T3 ALUMINUM. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″, 1/4″, 9/32″, 5/16″, 11/32″, 3/8″, 13/32″, 7/16″, 15/32″, 1/2″, 17/32″, 9/16″, 19/32″, 5/8″, 21/32″, 11/16″, 23/32″, …

CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020″ x .020″ x .005″ +/- .002 ” and .030″ x .030″ x .005″ +/- .002″ HOLE SIZES: 9/64,10/64,11/64,12/64,13/64, 14/64, 15/64, 16/64, 17/64, 18/64, 19/64…

CUSTOM HOLE STANDARD IN 2024-T351 ALUMINUM PER BOEING PART NUMBER NDT1084. EDM CORNER NOTCH SIZES: .020″ x .020″ x .005″ +/- .002 ” and .030″ x .030″ x .005″ +/- .002″ HOLE SIZES: 37/64,38/64,39/64,40/64,41/64, 42/64, 43/64, 44/64, 45/64, 46/64, 47/6…