Search by Part Numbers & Categories
Showing 3521 - 3540 out of 10430
Page 177 out of 522
| Part Number | Description | Equivalents | Action | |
|---|---|---|---|---|
|
DELRIN BLOCKS W/ TOE CLAMPS .500-.030 STEP BLOCKS
|
|
|
|
|
|
Eddy Current Crack Standard Magnesium AZ-31
|
|
|
|
|
|
Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista...
|
|
|
|
|
|
Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel dista...
|
|
|
|
|
|
Form Fitted Wood Case for IIW Type 1 Calibration Block
|
|
|
|
|
|
ALUM. IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 7075-T6 Aluminum. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 a...
|
CB-01-AL 802048A |
|
|
|
|
IIW TYPE 1 TEST BLOCK.. Aluminum Ultrasonic IIW Type 1 Test Block 1018 Carbon Steel. 1 "x 4"x 12". Contains 2" diameter hole and 4" radius. Also, 1/8" x 1" radius alternate reflector and 1/16" deep on echo side. Meets ASTM-E-164, MIL-STD-2154 and AW...
|
|
|
|
|
|
Meets AS-5282 and ASTM E1444 requirements. 12 Pre-drilled holes simulate subsurface discontinuities Verifies magnetic particle system performance when actual test parts with discontinuities are not available Forms surface indications at various magnet...
|
|
|
|
|
|
PLUG - 54-10-33
|
|
|
|
|
|
CUSTOM EDDY CURRENT SURFACE CALIBRATION BLOCK. PER CUSTOMER SUPPLIED DRAWING. MATERIAL: 7075-T6 Aluminum. EDM Notch size 1mm (.040') , .76mm(.030"), .2mm(.008") deep x .1mm(.004") wide +/- .002". Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
ROMPAS BLOCK, 7075-T6 ALUMINUM ½" (12.5mm) or 1" (25.4 mm) thick, 1" radius opposite 2" radius, with 5/64" diameter side drilled hole (3/4" deep flat bottom hole in 1" thick version). SPECIFICATION: ASTM E-164. (Includes wooden case)
|
|
|
|
|
|
FAIRCHILD REFERENCE STARDARD FOR THE SA227 DOOR use fastener MS2042AD4-10
|
|
|
|
|
|
EDDY CURRENT SURFACE BLOCK 7075-T6 ALUMINUM. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Inc...
|
SRS-082A-1 |
|
|
|
|
EDDY CURRENT SURFACE BLOCK 4130 STEEL. 2 EDM SLOTS ( 0.2mm deep +/-0.05mm & 0.12mm wide +/- 0.01mm). EDM NOTCH#1 ( 0.5mm deep +0.06/-0.04 & 0.12 wide +0.01/-0.02 ), and EDM NOTCH #2 ( 1.0mm deep +0.06mm/-0.04mm & 0.12mm wide +0.01mm/-0.02mm). Includes ...
|
SRS-082S-1 |
|
|
|
|
SURFACE STANDARD ALUMINUM(2024-T351) 1 EDM SLOT (0.040 DEEP)
|
SRS-4A SRS-4A |
|
|
|
|
SURFACE STANDARD STEEL 4340 1 EDM SLOT (0.40 DEEP)
|
SRS-4S SRS-4S |
|
|
|
|
SURFACE STANDARD TITANIUM 1 EDM SLOT (0.40 DEEP)
|
SRS-4A |
|
|
|
|
CUSTOM REFERENCES STANDARD PER AMSS5564
|
|
|
|
|
|
TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(.800"THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES)
|
|
|
|
|
|
TITANIUM VERTICAL(INBOARD LUG) ULTRASONIC REFERENCE STANDARD(1.500" THICK, 3.56" OUTSIDE RADIUS WITH A 1.312" BORE DIAMETER. COPPER BERYLLIUM NON FLANGED BUSHING WITH A 1.128 BORE DIA. ( 2 EACH .100" x .100" CORNER NOTCHES)
|
|
|
|
