Search by Part Numbers & Categories
Showing 3501 - 3520 out of 10430
Page 176 out of 522
| Part Number | Description | Equivalents | Action | |
|---|---|---|---|---|
|
10 STEP WEDGE SUPPLIED WITH DELRIN HOLDING BLOCK. STEP SIZES: .020", .040", .60", .80", .100", .120", .140", .160", .180", .200" +/-.001". Material: 7075-T6 ALUMINUM. PAD SIZE: .75" x .75". Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
15 HOLE REFERENCE STANDARD, Material: 7075-T6 Aluminum. Hole Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.0. A Total 15 Mid-bore notch @ 0.030" deep x 0.004" wide x 0.060" long in each hole. 3 Surface EDM No...
|
MHS-15-1A-3 |
|
|
|
|
Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 2024-T3 Aluminum. Includes Certification.
|
EC-CNDT-213444 |
|
|
|
|
Corrosion Reference Standard used for verifying function of low frequency corrosion probes. It is 0.100” thick with simulated 5%, 10% and 20% material loss. Overall size: 7.50” x 3.50” (190 x 89 mm). Material: 7075-T6 Aluminum. Includes Certification.
|
EC-CNDT-221804 |
|
|
|
|
CUSTOM 3 STEP CALIBRATION BLOCK, 2024-T3 ALUMINUM... STEP PAD SIZE: 25.0mm x 25.0mm. STEP THICKNESSES: 0.3mm, 0.5mm and 0.8mm ± 0.03mm. Supplied with Protective Acetal Holding Block. Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
CUSTOM 3 STEP CALIBRATION BLOCK 321 Stainless, STEP SIZES .75" x .75" FACE. STEP THICKNESSES OF 0.025", 0.040" and 0.060" +/-.001". Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 2024-T3 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
6 STEP WEDGE: 0.030 in. (0.762 mm), 0.050 in. (1.27 mm), 0.100 in.(2.54 mm), 0.150 in (3.81 mm), 0.300 in. (7.62 mm), and 0.500 in. (12.70 mm) +/-.001", Material: 7075-T6 Aluminum. Pad Size: 0.75" x 0.75" , BLOCK SIZE: 4.50" L x .750"W SUPPLIED WITH DELRIN HOLDING BLOCK. Includes Test Report and Certificate of Conformance.
|
|
|
|
|
|
CUSTOM ETHER NDE TEST BLOCK, PER SPEC
|
|
|
|
|
|
PROBE GUIDE FOR BOEING 747 PT 6 53-30-05. Material Delrin. Includes Test Report and Certificate of Conformance.
|
N/A |
|
|
|
|
COMPOSITE STEP WEDGE SOLID CFRP TAPE, BMS 8-276 Cytec. PAD SIZE: 3.0" WIDE by 2.0" LONG. STEP SIZES .100” to 1.0” in INCREMENTS of .100".
|
|
|
|
|
|
12 HOLE REFERENCE STANDARD. MATERIAL: 6AL-4V Titanium.Hole Sizes: (3/16", 7/32" ,1/4", 9/32", 5/16",11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4"), .020" X .005" WIDE +/-.001" THROUGH EDM NOTCH IN EACH HOLE. Includes Test Report, Conductivity and Certi...
|
|
|
|
|
|
ASTM DISTANCE AMPLITUDE SET OF 19 7075-T6 ALUMINUM (CASE INCL) 3/34", 5/64" and 8/64" FLAT BOTTOM HOLES
|
200129-1 |
|
|
|
|
CUSTOM REFERENCES STANDARD PER AMS4083
|
|
|
|
|
|
Custom 20 ply 12" x 12" CFRP Test Panel with 4 random defects(grafoil delaminations) between the ply layup in random locations. Autoclave cured per Boeing Specification BAC 5317. Includes C-Scan image to identify defects and Certificate of Conformance.
|
|
|
|
|
|
CALIBRATION BLOCK 70/30 COPPER-NICKEL
|
NDE005 |
|
|
|
|
CALIBRATION BLOCK 1018 CARBON STEEL
|
NDE005 |
|
|
|
|
CALIBRATION BLOCK 2205 SS (DUPLEX)
|
NDE005 |
|
|
|
|
CALIBRATION BLOCK 303 STAINLESS STEEL
|
NDE005 |
|
|
|
|
SURFACE REFERENCE STANDARD, ALUMINUM, .005W x .008", .020", .040" EDM NOTCH DEPTHS . MATERIAL 2024-T3 AL...CRJ200 PART1 51-20-06 PG.9
|
|
|
|
