Reference Standard

Showing 221 – 320 out of 100

Page 12 out of 1

Part Number Description Equivalents Action
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PROCEEDURE 1, FIGURE 11, PAGE 15 ALUMINUM 2014-T6 CONDUCTIVITY RANGE 35-40 IACS.. Includes Test Report and Certificate of Conformance.
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3. MATERIAL: MAGNESIUM. Includes Test Report and Certificate of Conformance.
AIRCRAFT BRAKING SYSTEMS REFERENCE STANDARD PT 3 32-42-05, PAGES 1-7 FIGURE 2 and 3 & 32-42-05 FIGURE 11 PROCEDURE 1 PAGE 15. MATERIAL: 304 STAINLESS STEEL. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE, 16mm, 17mm, 18mm, 19mm, 20mm, +/- .05mm. Material: 7075-T6 Aluminum. Pad Size: 20mm x 20mm square. Includes Delrin Holding Block. Includes Test Report Traceable to NIST and Certificate of Conformance.
Custom McDonnell Douglas 15 bolt hole reference standard with a .060″L x .030Dx .005″ max width mid-wall notch, and .030″x.030″x.005″ max width corner notch in each hole. Hole sizes (.156″, .172″, .188″, .203″, .250″, .266″, .281″, .297″, .313″, .328″…. Includes Test Report and Certificate of Conformance.
10 STEP CARBON STEEL WEDGE. STEP THICKNESS OF , .019″, .028″, .050″, .096″, .148″, .202″, .253″, .301″, .350″ .400″ +/-.001″. 1.0″ x 1.0″ Step Pad Face. Material: 4130 Carbon Steel. Includes Certification Report traceable to NIST.
10 STEP ALUMINUM WEDGE. STEP THICKNESS OF , .019″, .028″, .050″, .096″, .148″, .202″, .253″, .301″, .350″ .400″ +/-.001″. 1.0″ x 1.0″ Step Pad Face. Material: 7075-T651 Aluminum. Includes Certification Report traceable to NIST.
12 HOLE REFERENCE STANDARD 7075-T6 (3/16″ x 2), 13/64″, 7/32″, 15/64″ ,(1/4″ x 2 ), 17/64″,9/32″, 19/64″,5/16″, 21/64″ .020″x.020″ and .030″x.030″ x .005″W +/-.002″ CORNER EDM NOTCH PER BOEING SPECIFICATION 747 PART 6 51-00-00 PAGE 8 FIGURE 3. Includes Test Report and Certificate of Conformance.

NDT1084
CUSTOM EC STANDARD, NOTCH .060X.030X.005 TOL PER BSS7048, 304SS. Includes Test Report and Certificate of Conformance.
12 HOLE REFERENCE STANDARD IN 6AL-4v Ti; HOLE SIZES: (3/16, 7/32 ,1/4, 9/32, 5/16,11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4), .010″, .020″, .030″, and .040″ SURFACE NOTCHES. .050″x.050″ CORNER EDM NOTCH and .030″x.030″ CORNEREDM NOTCH, .050″Lx.030″D MID-…. Includes Test Report and Certificate of Conformance.
CUSTOM SURFACE WAVE STANDARD, 6AL-4V. Includes Test Report and Certificate of Conformance.
BOMBARDIER GLOBAL 5000 REFERENECE STANDARD BD-700 PT 6 57-70-001. ALSO IN 53-10-01 PART 6 PAGE 5 FIGURE 1. EDM Notches: .008″, .020″, .040″ ( .005″ W +0.00, – .002″), MATERIAL: 718 INCONEL. SIZE: 1.5″W x 3.75″L x .25″. Includes Test Report and Certificate of Conformance.

C SERIES
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 13-8PH STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

A6211:H6211
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 13-8PH MO STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 15-5PH STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

GSE 449
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 17-4PH STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 17-7PH STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008″, .020″, .040″ (.004W +/- .002), MATERIAL: 2014-T6 ALUMINUM. SIZE: 4.0″L x 1.0″W x .25″. Includes Test Report and Certificate of Conformance.
DDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008″, .020″, .040″ (.004W +/- .002), MATERIAL: 2014-T651 ALUMINUM. SIZE: 4.0″L x 1.0″W x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008″, .020″, .040″ (.004W +/- .002), MATERIAL: 2024-T3 ALUMINUM. SIZE: 4.0″L x 1.0″W x .25″. Includes Test Report and Certificate of Conformance.

RS0824-2024T3
EDDY CURRENT SURFACE REFERENCE STANDARD, EDM NOTCHES .008″, .020″, .040″ (.004W +/- .002), MATERIAL: 2024-T6 ALUMINUM. SIZE: 4.0″L x 1.0″W x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), MATERIAL: 300M STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002, MAX.006), CRES 301 1/2 HARD(MIL-S-5059) 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 304 STAINLESS STEEL 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

VMSS3RS-10
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 304L STAINLESS STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

RS0824-304L
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 316 STAINLESS STEEL 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 4130 STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 4340 STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

RS0824-4340
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″(0.2mm), .020″(0.5mm), .040″(1.0mm) (.004″W +/- .002), 6061-T6 ALUMINUM. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance and Material Certification.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 7075-T6 ALUMINUM. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

GSE 206
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 7075-T7 ALUMINUM. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 718 INCONNEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), 600 SERIES INCONNEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

RS0824-I600
Surface reference standard, Magnesium, with EDM notch depths of 0.008″, 0.020″ and 0.040″ inches (0.2mm, 0.51mm and 1.02mm). Reference standard overall dImensions 1 X 4 X 0.25 inches (2.54cm X 10.1cm X 6.35mm). EDM notches .007″ W MAX
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″(0.2mm), .020″(0.5mm), .040″(1.0mm) (.004″W +/- .002). MATERIAL: 250 MARAGING STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002), MATERIAL: NICKEL 200. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002, MAX .006″), 6AL-4v TITANIUM. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and COC

GSE 450

U8860550

RS0824-6AL4V
EDDY CURRENT SURFACE REFERENCE STANDARD, NOTCHES .008″, .020″, .040″ (.004″W +/- .002, MAX.006), 4130 or 4340 STEEL. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.

82040CS
EDDY CURRENT SURFACE REFERENCE BLOCK, EDM NOTCHES ( .008″, .020″, .040″ x .004″ W +/- .002″), INCONEL 718. SIZE: 1.0″W x 4.0″L x .25″. Includes Test Report and Certificate of Conformance.
7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0″ X 1.0″ MATERIAL: 4340 CRES STEEL. STEP RANGE:.040″, .080″, .160″, .250″, .300″, .400″, .500″. +/-.001″. Includes certification report traceable to NIST…
7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0″ X 1.0″ MATERIAL: 6AL-4V TITANIUM. STEP RANGE:.040″, .080″, .160″, .250″, .300″, .400″, .500″ +/- .001″. Includes certification report traceable to NIST…
7 STEP REFERENCE BLOCK ..STEP PAD SIZE: 1.0″ X 1.0″ MATERIAL: 7075-T6 ALUMINUM. STEP RANGE:.040″, .080″, .160″, .250″, .300″, .400″, .500″ +/- .001″. Includes certification report traceable to NIST and Certificate of Conformance.
5 STEP REFERENCE BLOCK ..STEP SIZES 1.0″ X 1.0″ 7075-T6 ALUMINUM. (400″,.450″,.500″,.550″,.600″). Includes Test Report and Certificate of Conformance.
5 STEP REFERENCE BLOCK ..STEP SIZES 1.0″ X 1.0″ 304 STAINLESS.(400″,.450″,.500″,.550″,.600″)… Includes Test Report and Certificate of Conformance.
5 STEP REFERENCE BLOCK ..STEP SIZES 1.0″ X 1.0″ 6AL-4V Ti.(400″,.450″,.500″,.550″,.600″). Includes Test Report and Certificate of Conformance.
6 Hole reference standard (Aluminum 7075-T6 with certifications). Hole Sizes: 1.0″, 1.125″, 1.250″ ,1.500″, 1.625″, 1.750″, ( .030 x .030 x .006 +/- .001) Corner EDM Notches and .010, .020, .040 Surface notches).. Includes Test Report and Certificate of Conformance.
10 STEP WEDGE SUPPLIED WITH HOLDING BLOCK. STEP SIZES: .040″, .080″, .120″, .160″, .200″, .240″, .280″, .320″, .360″, .400″ +/-.001″. Material: 7075-T6 ALUMINUM. PAD SIZE: .75″ x .75″. Includes Test Report and Certificate of Conformance.
EDDY CURRENT CALIBRATION BLOCK 2024-T351, WITH .020″Lx.005″W COUNTERSINK SURFACE EDM NOTCH IN EACH HOLE. HOLE SIZES: .156″Ø and .187″Ø. Includes Test Report and Certificate of Conformance.
4 STEP WEDGE. Material: 2024-T351 Aluminum. Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, +/-0.05mm Pad Size: 19mm x 19mm. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE 2024-T351, Step Sizes: 0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, +/-0.05mm Pad Size: 25mm x 25mm. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE 7075-T6 ALUMINUM:(.030″,.060″,.125″,.250″,.250, .375″ +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORT
5 STEP WEDGE 2024-T3 ALUMINUM:(.030″,.060″,.125″,.250″,.250, .375″ +/-.001 Note**with additional engraving marks of metric conversions on each step.** (0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm). IncludesTest Report Traceable to NIST and Certificate of Conformance.
5 STEP WEDGE 4340 steel:(.030″,.060″,.125″,.250″,.250, .375″ +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS
5 STEP WEDGE 6al-4v TITANIUM:(.030″,.060″,.125″,.250″,.250, .375″ +/-.001 Note**with additional engraving marks of metric conversions on each step.**..(0.762mm, 1.524mm, 3.175mm, 6.350mm, 9.525mm) INCLUDED WITH CERTIFICATION REPORTS
CUSTOM 5 HOLE REFERENCE STANDARD MADE OF 7075-T6 ALUMINUM WITH (0.5mm X 0.5mm +/- .05mm) CORNER EDM FLAWS. HOLE SIZE : 13/64″, 19/64″, 23/64″, 7/16″ & 31/64″. Includes Test Report and Certificate of Conformance.
15 HOLE REFERENCE STANDARD 7075-T6 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 5/8, 15 EDM NOTCHES .030X.030 CORNER TOP. Includes Test Report and Certificate of Conformance.
15 HOLE REFERENCE STANDARD 6AL4V 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2, 9/16, 1/2, 15 EDM NOTCHES .030X.030 CORNER. Includes Test Report and Certificate of Conformance.
4 STEP WEDGE. PAD SIZE 20mm X 20mm. STEP SIZES: 0.6mm, .2mm, 3mm, 4mm +/- .05mm. MATERIAL 6AL-4V
CUSTOM ALUMINUM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1016-NDT1021, 737, 747, 757, 767 PT 6 51-00-16 FIG 16, 777 PT 6 51-00-02 PROCEDURE 3, 787 PT 6 51-00-02 PROCEDURE 1. WITH HOLE DIAMETERS: .125″ .156″, .187″, .250″,.375″,.500″. CORNER…. Includes Test Report and Certificate of Conformance.
CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .156″,.250″,.312″,.375″,.437″,.500″. CORN…. Includes Test Report and Certificate of Conformance.
CUSTOM REFERENCE STANDARD PER BOEING SPECIFICATION NDT1040-NDT1045, 707, 727, 737, 747 PT 6 51-00-00 FIG 19, 757, 767 PT 6 51-00-17, 777 PT 6 51-00-05 PROCEDURE 2, 787 PT 6 51-00-04 PROCEDURE 1. DIAMETERS: .125″, .156″, .187″ ,.250″,.375″, .500″. … Includes Test Report and Certificate of Conformance..
CUSTOM ROTARY BLOCK REFERENCE STANDARD. 10MM, 13MM, 15MM, 17MM , 19MM, .020X.020X.004 +/-.001, ALUMINUM. Includes Test Report and Certificate of Conformance.
CUSTOM CALIBRATION BLOCK, THREE SURFACE NOTCHES .008″ , .020″ , .040″ SS. Includes Test Report and Certificate of Conformance.
6 STEP CALIBRATION BLOCK, CUSTOM, .030″, .040″, 0.60″ , 0.80″, .100″, .150″, 7075-T6 Aluminum. Includes Test Report and Certificate of Conformance.

NEC-6096-7075
CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 304SS. Includes Test Report and Certificate of Conformance.
CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 6AL4V. Includes Test Report and Certificate of Conformance.
CUSTOM 8 STEP STANDARD, .080,.071,.063,.056,.050,.040,.030,.020, 7075-T6. Includes Test Report and Certificate of Conformance.
CUSTOM REFERENCE STANDARD 7075-T6, NOTCH .010 +/-.001. Includes Test Report and Certificate of Conformance.
CUSTOM 6 STEP WEDGE, 6AL-4V .3543, .2755, .1968, .1181, .0393, .0196, 4.744L X .787 W, STEP FACE .787X.787. Includes Test Report and Certificate of Conformance.
CUSTOM 6 STEP WEDGE, 6AL-4V , 9MM, 7MM, 5MM, 3MM, 1MM, .0.5MM, STEP FACE 15MMX15MM. Includes Test Report and Certificate of Conformance.
CUSTOM 6 STEP WEDGE, 6AL-4V , 9MM, 7MM, 5MM, 3MM, 1MM, .0.5MM, STEP FACE 20MMX20MM. Includes Test Report and Certificate of Conformance.
CUSTOM 10 STEP WEDGE, 6AL-4V, 20MM, 18MM, 16MM, 14MM, 12MM, 10MM, 8MM, 6MM, 4MM, 2MM, STEP FACE 20MMX20MM. Includes Test Report and Certificate of Conformance.
Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 7075-T6 Aluminum. Includes certification Report Traceable to NIST.
Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 1018 Carbon Steel. Includes certification Report Traceable to NIST.
Custom 10 Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.05mm. Pad Size: 19mm X 19mm. Material: 304 Stainless Steel. Includes certification Report Traceable to NIST.
Step Block, 2.0mm, 4.0mm, 6.0mm, 8.0mm, 10.0mm, 12.0mm, 14.0mm, 16.0mm, 18.0mm and 20.0mm, Thickness Tolerance ±.02mm. Pad Size: .75” x .75”. Material: 6AL-4v Titanium. Includes Certification Traceable to NIST.
10 HOLE REFERENCE STANDARD 6AL-4V TITANIUM, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance.
11/16″ HOLE STANDARD IN 7075-T6 with .030″ x .030″ CORNER EDM NOTCH. MATERIAL SIZE 2.0″ x 2.0″ x .375″. Includes Test Report and Certificate of Conformance.. Includes Test Report and Certificate of Conformance.
10 HOLE REFERENCE STANDARD 4340 STEEL, HOLE SIZES: 1/8, 3/16 , 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, .030X.030 CORNER NOTCH .005+/-.001, 3 SURFACE NOTCHES .75L X.010,.020,.040 DEEP. Includes Test Report and Certificate of Conformance.
CUSTOM CALIBRATION PER SPEC. Includes Test Report and Certificate of Conformance.
SAFRAN MESSIER-BUGATTI-DOWTY ET SURFACE REFERENCE STANDARD 32-09-01 FIGURE 67,GRAPHIC-32-09-01-041-008-A01. MATERIAL: 2024-T351 ALUMINUM. Includes Test Report and Certificate of conformance.
SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 MAGNESIUM. Includes Test Report and Certificate of Conformance.
SAFRAN MESSIER-BUGATTI-DOWTY REFERENCE STANDARD 32-09-01 6AL-4V TITANIUM. Includes Test Report and Certificate of Conformance.
Olympus Aluminum multi-hole reference standard. Contains 5 hole sizes; 7/16, 1/2, 9/16, 3/4 and 1.0″ inch hole diameters.( .030″ x.030″ corner EDM notch in each hole). Includes Test Report and Certificate of Conformance.

MHS-5
12 HOLE REFERENCE STANDARD 6AL-4V TITANIUM. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″ 1/4″ , 5/16″, 3/8″, 7/16″, 1/2″, 9/16″ 5/8″, 3/4″ .020″ x .005″ +/- .001″ WIDE THRU NOTCH. .008″, .020″, .040″ SURFACE NOTCHES. .005″ +/-.001″. Includes Test Report and Certificate of Conformance.

RM120-C3T2-6AL4V-T6
12 HOLE REFERENCE STANDARD 7075-T6 ALUMINUM. HOLE SIZES: 1/8″, 5/32″, 3/16″, 7/32″ 1/4″ , 5/16″, 3/8″, 7/16″, 1/2″, 9/16″ 5/8″, 3/4″ .020″ x .005″ +/- .001″ WIDE THRU NOTCH. .008″, .020″, .040″ SURFACE NOTCHES. .005″ +/-.001″. Includes Test Report and Certificate of Conformance.

RM120-C3T2-7075-T6
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 1018 CRES STEEL PAD SIZE: .75″ X .75″ TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance.

UT-RC-5S1018
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 304 STAINLESS STEEL. PAD SIZE: .75″ X .75″ TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 4340 CARBON STEEL. PAD SIZE: .75″ X .75″ TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance.
5 STEP ALUMINUM WEDGE .100″, .200″, .300″, .400″,.500″, 5086Al 1″X1″ Sq..1″x5″ LONG. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE .100″, .200″, . 300″, .400″, .500″ MATERIAL: 6AL-4V TITANIUM. PAD SIZE: .75″ X .75″, TOLERANCE = +/- .001″. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 7075-T6 ALUMINUM. PAD SIZE: .75″ X .75″ TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance.

TRS-5-1A
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 7075-T7 ALUMINUM. PAD SIZE: .75″ X .75″ TOLEREANCE = +/- .001. Includes Test Report and Certificate of Conformance.
5 STEP WEDGE .100″(2.54mm), .200″(5.08mm),. 300″(7.62mm), .400″(10.16mm), .500″(12.7mm) MATERIAL: 6AL-4V TiTANIUM. PAD SIZE: .75″ X .75″. Includes Test Report and Certificate of Conformance. ***NOTE: Must Engrave Both inch and Metric conversions on…
5 STEP WEDGE .100″, .200″,. 300″, .400″, .500″ MATERIAL: 2024-T3 ALUMINUM. PAD SIZE: 1.0″ X 1.0″ TOLEREANCE = +/- .001. Includes Test Report Traceable to NIST and Certificate of Conformance.

2213E
CUSTOM CORROSION TEST PLATE 7075-T6 ALUMINUM. , 5%, 10%, 20%. PLATE SIZE: 8.0″ x 5.0″ x .125″. 1.0″Ø SPOTFACE 3 PLACES. Includes Test Report and Certificate of Conformance.
Custom Bolt Hole Standard 6Al-4v Titanium. Contains 12 hole sizes; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, and 7/8 inch diameters.( .050″ x .050″ +/- .005″ x .005″W +0.000″ / -0.002″ Corner EDM Notch. Per Boeing Specification 77…. Includes Test Report and Certificate of Conformance.
13 HOLE REFERENCE STANDARD 7075-T6 aluminum. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030″ X. 030″ x.005″ ±….. Includes Test Report and Certificate of Conformance.
13 HOLE REFERENCE STANDARD 6AL-4V Titanium. Hole Sizes: 3/16(.1875), 13/64(.203), 7/32(.218), 15/64(.234),1/4(.250), 17/64(.265), 9/32(.281), 19/64(.297), 5/16(.312),21/64(.328),11/32(.343), 23/64(.359), 3/8(.375). EDM NOTCH: .030″ X. 030″ x.005″ ±.00…. Includes Test Report and Certificate of Conformance.
MD STACKABLE REFERENCE STANDARD, 06-20-01, .040, .050, .060, .063, .068, .071, .090, .100, .190, AL. Includes Test Report and Certificate of Conformance.